TOX® test report with all data regarding the TOX® Joint including strength specification
TOX® tool pass with information for your production and maintenance departments (included with every toolkit)
Sheet Metal Clinching Tools
TOOLKITS
TOX® offers the only safe way to apply clinching technology with guarantee! We can draw from thousands of already realized tool combinations in our database. If your material combination or application is not yet available, we will determine the suitable tool set. For you, of course, free of charge. You get from us:
Clinching tools
TOX® Collar Punch
TOX® Collar Punch
Available in the following diameters: 1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm up to 26 mm. Special lengths of 30 mm, 40 mm, 50 mm, 80 mm and 100 mm are possible.
TOX® Round Joint Collar Die
TOX® Round Joint Collar Die
The die with insert has an integrated oil relief system. Available in the following diameters: 1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm up to 26 mm.
TOX® Round Joint Die, stepped
TOX® Round Joint Die, stepped
The stepped die is particularly useful for difficult component accessibility, such as C-, U-profiles, angled sheets etc. The tools can be replaced quickly and easily.
TOX® Round Joint Die, flat
TOX® Round Joint Die, flat
The flat die reaches almost any corner of the component. It enables small seam widths and a compact design. The tools can be replaced quickly and easily.
TOX® SKB Collar Die
TOX® SKB Collar Die
The SKB Die is perfectly suited to complex joining tasks. It has 3 - 6 solid parts and 3 - 6 moveable segments. The die is available in diameters 5 mm, 6 mm, 8 mm and 10 mm.
TOX® SKB Die, stepped
TOX® SKB Die, stepped
The stepped die is particularly useful for difficult component accessibility, such as C-, U-profiles, angled sheets etc. The tools can be replaced quickly and easily.
TOX® TWINpoint Collar Punch
TOX® TWINpoint Collar Punch
The TOX® TWINpoint with anti-twist device and significantly increased joint strength compared to the single point. The TOX® TWINpoint also has excellent electric conductivity.
TOX® TWINpoint Collar Die
TOX® TWINpoint Collar Die
The TOX® TWINpoint is particularly suited to slim flanges and limited installation spaces. The rigid die combined with the same process flow as for the single point account for the full benefits of the TOX® Round Joint.
Special types of the clinching tools
Special types of the clinching tools
Special types are for example the anti-rotation device for TOX® Collar Tools or tapering as well as TOX® Side Mount Tools.
Tooling
In addition to the clinching technology, TOX® also provides complete toolkits and multi-point tools for automated manufacturing.
The in-house tool construction and tool manufacturing realizes project-specific requirements and supplies ready-to-use press systems from one source. This means you can benefit from seamless and needs-based service with TOX® as sole contact partner and technology expert.
Optimize your toolkit
TOX® spring CZF for stripper
Special coil spring suitable for the strippers type CSR and type CMR. The springs are cut according to parallelism and angularity.
TOX® stripper
After joining, the punch must be removed from the point indentation again, or the die must be lifted from the point elevation. This is why strippers for punch and die are required.
TOX® holding flange
Holding flange for stripper, can be screwed onto the working piston of the TOX® Powerpackage or adapted on sheet side.
TOX® ToolCheck
The die monitoring TOX® ToolCheck monitors the state of the TOX® Clinch Die in combination with the process monitoring.
TOX® Spraying System
Specifically developed spraying system for spraying the workpiece surface and/or TOX® tools directly before the joining process. This reduces the joining and stripping forces.