The TOX® ElectricPowerDrive EXe-F is an electromechanical servo drive, which has extremely high dynamics due to its fast acceleration with planetary roller thread spindle. Despite its high performance, it has compact flange dimensions and can therefore be used in a space-saving manner. As a decentralized collection point for all data via the TOX® EdgeUnit, the EXe-F is able to collect and process comprehensive information. The EXe-F is especially designed for continuous operation and thus offers a reliable and durable solution for demanding applications.
The ultra-fast EXe-F
TOX® ElectricDrive Core
)
)
In detail
The TOX® ElectricPowerDrive EXe-F is specially designed for continuous operation and therefore offers a reliable and durable solution for demanding applications. It is available in the following press force versions: 5 kN, 10 kN, 30 kN, 60 kN, 100 kN.
Highlights at a glance:
Extremely fast and highly dynamic up to 800 mm/s
Decentralized collection point of all data via the TOX® EdgeUnit
Integrated force measuring
Designed for permanent operation
Highly accurate force measuring
Stroke lengths: 150 mm / 300 mm
Optimize your drive solution
Safety brake
)
In the event of a malfunction, the safety brake stops the ElectricPowerDrive and protects against injury. The brake is checked for functionality before each cycle.
Motor holding brake
)
The motor holding brake prevents the weight-loaded working piston from dropping when the system is de-energized. The motor holding brake is connected via the motor cable included in the cable set.
Engine fan
)
The EXe servo drives can be equipped with a fan, which cools the motor, if required. This enables a higher power density and thus lower cycle rates.
Protection class IP65
)
Protected against dust ingress (dust-tight), fully protected against contact, protected against water jets from any angle
Lubrication unit
)
The EZ-K lubrication unit supplies the drive with the correct amount of grease. Optionally available for the EQe and EXe drives.
Force Sensor
)
In addition to the integrated force sensor, external force sensors (strain gauge or piezo) can be integrated at the customer's request.
Travel measuring system
)
An external displacement sensor determines the absolute position of a workpiece. The sensor is independent of the bending up of the system.
TOX® UDI Panel
)
The TOX® UDI Panel is a touch panel with integrated PC and the TOX® Software on a hardened Linux® operating system.
It combines the control and visualization of your plant with the storage and processing of the process data.
Attachment kit lubrication position
)
For shifting the lubrication position to ensure better accessibility for filling lubricant.
Optimize the service operation on your TOX® ElectricDrive System!
Working piston with threaded holes on the face side
)
Working piston with threaded holes on the face side
PLe Kit
)
Assembled and wired ready for operation, where only the 400 V and 24 V power supply and the safety signal have to be wired. A performance level e (PLe) is thus achieved in the overall system.
Nominal force pushing and pulling equal
)
Design optimized for identical nominal force pushing and pulling
Punching execution
)
Drive optimized for punching
Increased speed
)
Achieve shorter cycle times with increased speed execution
Motor with absolute encoder
)
Displacement measurement by means of absolute encoder