The powerful line-X

PNEUMOHYDRAULIC DRIVES

The high performance drives

The line-X series provides numerous configuration options, improved seal technology and large variety of models.

The line-X drives are available in two designs: as slim type X-S and as compact version type X-K.

Up to 10 million strokes in 12 months guaranteed!

TOX^® Powerpackage line-X - Types

CAD Data

TOX^® Powerpackage X-S

The slim drives are equipped with pneumatic spring, power stroke valve and fast stroke support. This achieves significantly increased quick forces and lifting speeds as well as long maintenance intervals.

Press force range: 11 kN - 1727 kN
Power stroke range: 6 mm - 22 mm
Total stroke: 50 mm / 100 mm

TOX^® Powerpackage X-K

The special design with shorter overall length is a good choice for limited installation spaces. The compact drives are equipped with pneumatic spring, power stroke valve and fast stroke support.

Press force range: 11 kN - 1727 kN
Power stroke range: 6 mm - 96 mm
Total stroke: up to 400 mm

Advantages

Total strokes up to 400 mm, with power strokes up to 69 mm
Designed for particularly fast lifting speeds, high quick forces, very high stroke frequencies, extremely long maintenance intervals
Prepared for stroke request
Prepared for the attachment of an external travel measuring system
Fixed stop with elastomer damping in the forward stroke
Patented power bypass: Prevents negative pressure in the oil system, which may be generated during procedures such as punching, shearing etc., or during high stroke speeds.
Patented, hydraulic end position damping: Enables a low-noise and tool-saving application in the return stroke
Double-supported working piston: Ensures an extremely precise guide
Absolute separation of air and oil: Basic requirement for error-free operation
Optional control versions such as pressure regulator in the power stroke line, external power stroke connection or external power stroke release are available

Optimize your drive solution

Tool coupling

The ZWK tool coupling is screwed directly onto the working piston of the TOX^® Powerpackage and forms a flexible connection with the tool. This prevents transverse forces from acting on the cylinder. In addition, the ZWK tool coupling contains an anti-rotation device.

Tool holder with anti-rotation device

The tool holder is mounted on the working piston of the TOX^® Powerpackage. The guide bushings in the press frame thus provide reliable anti-rotation protection.

Mini ram

The ZWK tool coupling is included in the scope of delivery of the ZMS mini tappet. This is mounted on the working piston of the TOX^® Powerpack. In addition, two bushings in the press frame ensure optimum guidance.

Oil level monitoring

The oil level monitoring ZU measures the oil level inside the TOX^® Powerpackage. When the minimum oil level is reached, the integrated indicator pin actuates an optional pneumatic or electric switch. The reset is then carried out manually.

Mounting plate

The front mounting plate (ZFV) can be retrofitted to the TOX^® Powerpackages. The rear mounting plate (ZFH) cannot be retrofitted. It can be used with TOX^® Powerpackages with larger translator parts A2 > A.

Mounting with rear spherical bearing

The ZGH mount can be used with TOX^® Powerpackage with larger translator parts A2 > A and cannot be retrofitted.

Electronic pressure switch

The oil pressure in the high-pressure section of the TOX^® Powerpackage is recorded in the electronic pressure switch ZDO and reflected by a 4-digit LED display.

Press force sensor

The ZPS press force sensor can be screwed directly onto the working piston of the TOX^® Powerpackage. It can be used to measure pressing forces in tensile and compressive direction. The sensor is protected against dirt and dust.

External displacement encoder

The ZHW external displacement encoder determines the absolute position of the working piston, even after a blackout. By mounting it externally on the tie rods, the mounting position of the displacement measuring system can be adapted to the conditions in the press.

Oil pump

The oil pump guarantees the optimum maintenance concept and long maintenance intervals. It is used for easy, bubble-free filling and lowering of the oil volume of the TOX^® Powerpackage. The housing and the filling hose are transparent, allowing continuous oil level monitoring in the pump. No high effort is necessary.

Tool set

Special tool set for mounting and dismounting the seals on the TOX^® Powerpackage. The case also contains instructions and tips for handling the tools.